Browse Categories
Browse by Manufacturer
Price Ranges

Instek GSP-830 Spectrum Analyser 3Ghz

MSRP: $5,100.00
Price: $4,100.00
You Save: $1,000.00 (20 %)
Item Number: GSP-830
Manufacturer: Instek
Manufacturer Part No: GSP-830
3GHz Spectrum Analyzer

Featuring high performance, uncompromised design, and remote monitoring software, the GSP-830 3GHz Spectrum Analyzer is the latest evolution from GWInstek. The GSP-830 is one of the most advanced Spectrum Analyzer GWInstek has produced to date. The GSP-830 has an exceptional noise floor of -152dBm/Hz; combined with the optional GAP-802 preamplifier, the noise floor can reach a remarkable -172dBm/Hz. With a low noise floor, the GSP-830 is more than capable of finding limits; Trace Detection, combined with an easy-to-use interface, makes the GSP-830 an ideal solution for spectrum analysis. Using the Auto Sequence mode, advanced users can define their own macros in 10 Sequence sets. Repeat or Single run mode can be used to streamline repetitive tasks. PC connection is effortless and versatile supporting USB host/device, RS232C, VGA and GPIB (optional) for remote monitoring, control and analysis.
Frequency Range
9kHz ~ 3GHz
Aging Rate
± 10ppm, 0~50°C, 5ppm/yr
Span Range
2kHz ~ 3GHz in 1-2-5 sequence, full span, zero span
Phase Noise
-80dBc/Hz @1GHz 20kHz offset typical
Sweep Time Range
50ms ~ 25.6s
RBW Range
3kHz, 30kHz, 300kHz, 4MHz
RBW Accuracy
Video Bandwidth Range
10Hz ~ 1MHz in 1-3 steps
Measurement Range
-103dBm ~ +20dBm: 1MHz ~ 15MHz, Ref.Level @ -30dBm
-117dBm ~ +20dBm: 15MHz ~ 1GHz, Ref.Level ≧-110dBm
-114dBm ~ +20dBm: 1GHz ~ 3GHz, Ref.Level ≧-110dBm
(Span = 50kHz, RBW = 3kHz)
Overload Protection
Max. +30dBm, ±25VDC
Reference Level Range
-110dBm ~ +20dBm
±1dB @100MHz
Frequency Flatness
Display Range Linearity
±1dB over 70dB
Average Noise Floor
<-135±1dBm/Hz: 1MHz ~ 15MHz, Ref.Level @ -30dBm
<-149dBm/Hz, typical -152dBm/Hz: 15MHz ~ 1GHz, Ref.Level ≧-110dBm
<-146dBm/Hz, typical -149dBm/Hz: 1GHz ~ 3GHz, Ref.Level ≧-110dBm
Third Inter-Modulation
<-70dBc RF Input @-40dBm, Ref.Level @-30dBm
Harmonic Distortion
<-60dBc RF Input <-40dBm Typical, Ref.Level @-30dBm
Non-Harmonic Spurious
<-93dBm, 1MHz ~ 15MHz, Ref.Level @-30dBm
<-107dBm ~ +20dBm: 15MHz ~ 1GHz, Ref.Level ≧-110dBm
<-104dBm ~ +20dBm: 1GHz ~ 3GHz, Ref.Level ≧-110dBm
(Span = 50kHz, RBW = 3kHz)
640 x 480 high resolution TFT color LCD
Split Windows
Active Window: Upper, Lower or Alternate (two simultaneously sweeping windows)
10 Markers for peaks: 5 normal-delta marker pairs
Functions: Delta, To Peak, To Minimum, Peak Track, Peak Table, Peak Sort
Trace Detection
3 traces with Peak, Maximum hold, Freeze, Average, Trace math
Power Measurement
ACPR, OCBW, Channel Power, N dB and Phase Jitter
Autoset Function
Auto tuning the measurement result for observation
Conditions: Video, External (Positive-going, +5V TTL external signal)
Mode: Normal, Single, Continuous
Automated test by user-defined macros without any remote controller, 10 Sequential macro set and 10 macros per each set, Variable delays and wait-to-go facilitate automated measurement, Do-sequence links and nests different sequence sets.
RF Input
N female, 50Ω nominal
RF input VSWR: <2:1, @0dBm Reference Level
External Reference
Type: BNC female
Clock Input
1M, 1.544M, 2.048M, 5M, 10M, 10.24M, 13M, 15.36M, 15.4M, 19.2MHz
Reference Clock Output
Type: BNC female, 10MHz
DC Input (DC Power Operation)
Jack : 5.5mm, 12V
DC Output (for GAP-801)
Type: SMB Male, outputs +9V/100mA Max.
Sub-D 9 pins female
USB Connector
USB Host/Device full speed supported
VGA Output
Front panel: Type A receptacle for USB flash devices
Option: GPIB Interface
Fully programmable with IEEE 488.2 compliance
AC 100 ~ 240V, 50/60Hz
User Manual x 1
Power Cord x 1
USB Cable (Type A plug to Type mini-B plug) x1
330(W) x 170(H) x 340(D) mm
Approx. 6kg

Shopping Cart
Your cart is empty.