Browse Categories
Browse by Manufacturer
Price Ranges

Instek GSP-827 Spectrum Analyser 2.7Ghz


MSRP: $5,100.00
Price: $4,200.00
You Save: $900.00 (18 %)
Item Number: GSP-827
Manufacturer: Instek
Manufacturer Part No: GSP-827

2.7GHz Spectrum Analyzer

The GSP-827 Spectrum Analyzer is a very handy instrument for RF measurement application, delivering a superior combination of easy-to-use design and exceptional price/performance value enclosed within a highly portable package. Covering 9kHz to 2.7GHz, the GSP-827 is designed to meet Production/Development test demands of RF products as well as on-site Maintenance/ Installation of wireless communication systems.

FREQUENCY
Frequency Range
9kHz~2.7GHz
Aging Rate
± 10ppm, 0~50°C, 5ppm/yr
Span Range
2kHz ~ 2.5GHz in 1-2-5 sequence, full span, zero span
Phase Noise
-85dBc/Hz @1GHz 20kHz offset typical
Sweep Time Range
50ms~25.6s
RESOLUTION BANDWIDTH
RBW Range
3kHz, 30kHz, 300kHz, 4MHz
RBW Accuracy
15%
Video Bandwidth Range
10Hz ~ 1MHz in 1-3 steps
AMPLITUDE
Measurement Range
-100dBm ~ +20dBm: 1MHz~2.5GHz @ 3k RBW
-95dBm ~ +20dBm: 2.5GHz~2.7GHz @ 3k RBW
-75dBm ~ +20dBm: 150kHz~1MHz @ 3k RBW
-65dBm ~ +20dBm: 50kHz~150kHz @ 3k RBW
Overload Protection
+30dBm, ±25VDC
Reference Level Range
-30dBm ~ +20dBm
Amplitude Display Range
75dB
Amplitude Accuracy
±1.5dB @100MHz
Frequency Flatness
±1.5dB
Amplitude Level Linearity
±1.5dB over 70dB
DYNAMIC RANGE
Average Noise Floor
-100dBm: 1MHz~2.5GHz
-95dBm: 2.5GHz~2.7GHz
-75dBm: 150kHz~1MHz
-65dBm: 50kHz~150kHz
Third Inter-Modulation
< -70dBc @-40dBm Input, 2MHz apart
Harmonic Distortion
< -60dBc @-40dBm Input
Non-Harmonic Spurious
< -60dB @typical down from Reference Level 150k~2.7GHz
DISPLAY SYSTEM
Display Device
640 x 480 high resolution graphical LCD, B&W
Display Function
Contrast, backlight ON/OFF, Invert screen split window : upper and lower
FUNCTIONS
Marker Mode
Normal and delta mode
Number: Up to 10 in multi marker mode
Internal Memory
100 traces and setup for Save/Recall
Peak Search
To peak, to center , next peak, peak right, peak left and peak track
Trace Number
Number:2, tr A and B for display memory
Functions: peak hold, average, freeze, math.
Detect: sample, peak+, AVG 1/2/3, quasi-peak
Power Measurement
ACPR x 2, OCBW, Channel Power
Trigger
Functions: Video, External
Mode: continuous, single
Source: video, external (0~5V rising edge)
Setting: Trigger delay, Trigger frequency
Limit Line
Number: 2, high and low
Functions: Edit:Insert, Delect, Undo Pass/Fail
Calibration Signal
100MHz, -30dBm
CONNECTORS
RF Input
 
Type: N female, 50Ω nominal
RF input VSWR: <1.5:1, @0dBm Reference Level
External Reference
Type: BNC female
Clock Input
1M, 1.544M, 2.048M, 5M, 10M, 10.24M, 13M, 15.36M, 15.4M, 19.2M
Reference Clock Output
Type: BNC female, 10MHz
DC Input
Jack : 5.5mm, 12V
INTERFACE
RS-232C
Sub-D 9-pin female
GPIB (Option)
Fully programmable with IEEE488.2 compliance
POWER SOURCE
 
 
AC 100 ~ 240V, 48 ~ 63Hz
DIMENSIONS & WEIGHT
 
 
330(W) x 170(H) x 340(D) mm
Approx. 4.5kg
Search
Shopping Cart
Your cart is empty.