Browse Categories
Browse by Manufacturer
Price Ranges

AEMC Simple Logger® II Model ML912

Price: $729.00
Item Number: 2126.37
Manufacturer: AEMC
Manufacturer Part No: ML912

Simple Logger® II Model ML912

The Simple Logger ® II Model ML912 is a two channel AC current recording device powered by two alkaline batteries. It incorporates two user selectable measurement ranges of 0 to 100 Amps and 0 to 1000 Amps. Line tracking is performed such that 64 samples over one line cycle are taken. Frequency tracking is performed over the range of ±2Hz around the nominal line frequency 50 or 60Hz. Harmonic measurements are calculated from these 64 samples. Harmonics are only available from the Simple Logger ® II Control Panel within the free DataView® software included with the unit.

Channels Two
Input Captive MiniFlex AC current flexible sensor
Ranges (2) 1 to 100AAC & 5 to 1000AAC
Accuracy (50/60Hz) 1 to 100A ±(1% R +0.5A)
5 to 1000A (1% R +1A)
Resolution 0.1A
Maximum Input Current 600A < 1 min.
Sample Rate 64 samples / cycle
Storage Rate Programmable from 125ms to 1 per day
Storage Modes Start/Stop, FIFO,  extended mode (XRM) and Alarm
Recording Length 15 minutes to 6 weeks, programmable with DataView software
Memory 240,000 measurements (512KB). Recorded data is stored in non-volatile memory and will be retained even if battery is low or removed.
Communication USB 2.0 optically isolated
Power Source 2x1.5V AA (LR6) alkaline batteries
Battery Life 100 hrs to >45 days (depending of sample rate/recording length)
Dimensions 4.95 x 2.75 x 1.28” (136 x 70 x 32mm) w/o sensor
Sensor/Cable Length Sensor: 6” (152mm) / Cable: 6 ft. (2m)
Weight (with battery) 8.67 oz (245g)
Case Polycarbonate
Maximum Conductor Size         Ø 1.77” (45mm)
Operating Temperature 14° to 122°F (-10° to 50°C)
Storage Temperature -4° to 140°F (-20° to 60°C)
Relative Humidity Up to 85% @ 95°F (35°C)
Ingress Protection (IP) IP40
EMC EN 61326-1
Safety Compliance IEC 61010-1, EN 61010-2-32 600V CAT IV Pollution Degree 2
Shopping Cart
Your cart is empty.